Infineon Technologies is to integrate 600 and 700V GaN power hemts alongside gate driver chips inside single packages, in 5 x 6mm or 6 x 8mm SMD packages. IGI70NxxxA2xS is to be a 700V range that combines a single GaN transistor with a single-channel driver in 5 x 6mm PQFN with with 140 to 500mΩ options (IGI70NxxxA2PS), or 6 x ...
Tag Archives: gallium nitride
Renesas offers GaN power transistors after Transphorm deal
Renesas Electronics has completed the acquisition of GaN transistor maker Transphorm. “With the closing of the acquisition now completed, Renesas will immediately start offering GaN-based power products and related reference designs to meet the rising demand for wide bandgap semiconductor products,” said Renesas. “Investing in the power business is an important part of Renesas’ strategy.” Other recent moves it has ...
Radiation-specified 40V GaN for space
EPC Space has created two surface-mount 40V radiation-specified GaN hemts for space use. EPC7001BSH is a 50A (120A pulse) 11mΩ transistor in 5.7 x 3.9mm packaging EPC7002ASH is a 15A (40A pulse) 28mΩ transistor in 3.4 x 3.4mm packaging “Both devices have a total dose radiation rating greater than 1,000kRad(Si) and SEE immunity for LET of 83.7MeV/mg/cm2 with Vds up ...
PCIM: 250W smart GaN motor driver is only 12x12mm
Texas Instruments introduced a 450V intelligent power module that includes a GaN three-phase bridge for motors up to 250W. Called DRV7308, it can stand-off 650V and handle pulses up to 5A. Inside its 12 x 12mm QFN package and six 205mΩ hemts (at 25°C ambient), drivers and protection component, and it is capable of implementing inverters with >99% efficiency, according ...
PCIM: GaN motor drive eval kit from CGD and Qorvo
Cambridge GaN Devices (CGD) has teamed up with Qorvo to build a GaN-based evaluation kit for controlling brushless-dc and permanent magnet synchronous motors. From Qorvo comes its PAC5556A motor control IC that combines a 150MHz Arm Cortex-M4F processor and 128kbyte of flash, with 600V gate divers, PWMs and multi-chanel data conversion. CGD is providing its IC-based GaN power hemts that ...
Infineon adds bi-directional GaN transistors
Infineon has announced bi-directional GaN power transistors at 40, 650 and 850V, and a current sensing GaN transistor. There are two types of bi-directional transistor: The 650 and 850V devices are both normally-off monolithic gate-injection transistors with four operational modes via two separate gates and a substrate terminal, to deliver what the company calls ‘independent isolated control’. “They utilize the ...
200A 50V GaN dc-dc converter for space
EPC is aiming at satellites with an application note on four-phase dc-dc point-of load converters using multiple 26 x 19mm modules. The note, AN005, picks a radiation-specified current-mode PWM controller from Texas Instruments (TPS7H5001-SP) as a source of PWM waveforms. Each TPS7H5001-SP can produce two pairs of upper and lower PWMs for a total of two phases, and TPS7H5001-SP has ...
Power Integrations buys Odyssey vertical GaN assets
Power Integrations is to acquire the assets of Odyssey Semiconductor for its vertical gallium nitride transistor technology. All commercial GaN power transistors are lateral current flow devices, including those already made by Power Integrations – technical limitations make vertical GaN devices very hard to make on a commercial scale. In a lateral device, source and drain contacts are on top ...
700W/channel Class-D audio amp design with GaN output
EPC has used GaN transistors to create a high-power Class-D two-channel audio power amplifier design. Instantiated in evaluation kit EPC9192, it is capable of pushing 700W/channel into 4Ω (or 2Ω) or 350W/channel into 8Ω. Bridging the two channels results in 1.4kW drive into 4 to 8Ω. Key components, per channel, are a pair of 200V EPC2307 GaN transistors on a ...
GaN, SiC and Si squeeze 4.5kW out of server PSU
Navitas Semiconductor has demonstrated a 4.5kW 54V server power supply using both GaN and SiC transistors. Claimed density is “over 130W/in3 with efficiency over 97%. The architecture replaces the standard four diode bridge (and boost power factor correction) at the front end with an active all-transistor circuit – a multi-phase totem pole power factor corrector. While often called ‘bridgeless’ because ...