Murata has created a 1210 (3.2 x 2.5 x 2.5mm) wide-band wire-wound chip common mode choke that will attenuate noise on 1.2A automotive supply rails at over 1GHz. “It is of particular value when addressing the power supply line noise issues now occurring as driver assistance hardware connects with wide frequency band sensors and imaging equipment such as radar and ...
RF & Microwave
The latest Electronics Weekly product news on RF and Microwave products.
Bluetooth LE 5.3 and security in a wireless MCU
STMicroelectronics has created a 40nm Bluetooth LE 5.3 wireless microcontroller family centred around a 100MHz Arm Cortex-M33 core – that’s the security-enabled version of the Cortex-M3, which has TrustZone virtualisation. Called STM32WBA52, the ICs are similar to the company’s earlier Cortex-M4-based STM32WB wireless microcontrollers, and have a +10dBm 2Mbit/s 2.4GHz transceiver (10.6mA at 0dBm TX, 7.4mA Rx) that can support ...
A dozen 26GHz coax connections in a single rugged housing
Lemo has put a dozen 26.5GHz coax contacts inside a high-reliability circular connector housing, sealed to IP68 when mated. Called LM.232, its signal paths are 50Ω, with a VSWR of ~1.2 from 5 to 15GHz, peaking to 1.4 at 18GHz. The contacts are designed to be terminated on LMR-100A, Multiflex 86, RG-174/U, RG-188 A/U or RG-316/U flexible cables. Attachment is ...
6G – the next wireless communications standard
The fundamentals of next-generation wireless communications are in progress and commercial deployment is expected around 2030. This will enable new possibilities, including holographic applications, extended realities and digital twins, says Dr Taro Eichler. The prospect of offering large contiguous frequency bands to meet demand for extremely high data transfer rates in the Tbit/s range will drive the next generation of ...
Ringing the changes in Barcelona
MWC makes a welcome return as an in-person event later this month. This preview highlights some of the announcements expected at a varied exhibition and conference that covers automotive to satellites, writes Caroline Hayes. MWC is renowned for networking opportunities and collaboration. Two partners that will showcase their collaborative efforts are Picocom and Antevia Networks. They are working together to ...
Passive Z-match, balun and harmonic filter for sub-GHz wireless MCUs
STMicroelectronics has released nine chip-scale passive RF balun ICs that include antenna impedance-matching and harmonic filtering for its STM32WL sub0GHz wireless microcontrollers. Intended to sit in Rx and TX paths between the MCUs and their antennas, the 8bump parts are in 2.13 x 1.83mm packages with a maximum height of 630µm after reflow. Applications are foreseen in LoRaWAN, Sigfox, M-Bus ...
Phone processor for gaming and AI photography
MediaTek has announced some details of its Dimensity 7200 phone SoC. To be built on a 4nm process from TSMC, it will have eight Arm cores: two 2.8GHz Cortex-A715 cores and six Cortex-A510, then MediaTek’s own AI processing pnit (APU) and an Arm Mali G610 GPU. Memory runs at 6.4Gbit/s and there is UFS 3.1 for storage. For gamers, there ...
Bluetooth SIG reaches for electronic shelf label wireless standard
The Bluetooth Special Interest Group (SIG) has released a new wireless standard for the electronic shelf label (ESL) market – Bluetooth ESL – which it describes as scalable, ultra-low power and highly secure. Designed to replace proprietary wireless protocols, it is based on Bluetooth technology and was created with companies involved in the market, such as such as SES-imagotag and ...
GaN amplification up to 350W for C-Band radar
For phased-array C-Band radar, CMPA5259050S and CMPA5259080S from Wolfspeed are respectively 50W and 80W 5.0-5.9GHz GaN MMIC power amplifiers. The “two-stage reactively-matched amplifier approach enables high power and power added efficiency to be achieved in a 5 x 5mm QFN surface -mount package” (black in photo), according to Richardson RFPD, which is stocking the parts, and offering design support. CMPA5259080S ...
Power IC for Bluetooth LE has reset, battery fuel gauge, watchdog and more
Nordic Semiconductor has announced a power management IC for devices with Bluetooth Low Energy interfaces that includes battery charging and four regulated power outputs. To be called nPM1300, it is to emerge in 3.1 x 2.4mm WL-CSP or 5 x 5mm QFN packaging and be controllable over an I2C compatible interface. “The interface provides access to system management functions such ...