Able to detect human body, face and hands, and estimate the gaze, blink, age, gender and facial expressions such as happiness, surprise, anger and sadness, the Human Vision Component is an imaging sensing unit, comprised of a camera module and a separate main board that can be installed on the edge of a flat display. The HVC from Omron Electronic ...
Internet of Things
Electronics related to the Internet of Things (IoT), and all its associated sensors, comms, security, and embedded systems.
One antenna for NB-IoT, LoRa, Sigfox, LTE-M and Zigbee
Fractus Antennas is aiming at narrow-band-IoT, LoRa, Sigfox, LTE-M and Zigbee with an antenna evaluation board and application note that covers 824-960MHz and 1.71-2.69GHz through a single input/output port. It uses firm’s FR01-S4-224 antenna (see diagram), which has a 12 x 3mm footprint – a device which featured in an earlier 863-928MHz app note design – but this time in a ...
Rutronik UK adds Nordic’s Bluetooth 5.1 SoC for navigation
Believed to be one of the first devices to support Bluetooth Core 5.1, Nordic Semiconductor’s nRF52811 SoC is now available from Rutronik UK The Bluetooth Core 5.1 specification was introduced early this year and adds tracking and location functions. The nRF52811 is a multi-protocol SoC that supports IEEE 802.15.4 for Thread and ZigBee and also Bluetooth Direction Finding and Bluetooth Long Range for direction ...
Farnell adds MKR shields to Arduino line
Distributor, Farnell, has added four compact Arduino MKR shields to its Arduino product range. The accessories – three shields and a motor carrier – can be integrated into battery-powered IoT applications in industrial automation, environmental monitoring, agriculture, tracking and energy monitoring projects. The ENV Shield, RGB Shield and Therm Shield have a standard, modular design and are powered by a 32-bit Arm ...
Trio team up for secure IoT cellular connectivity
Arrow Electronics, Infineon and Arkessa have joined forces to provide connected devices for the IoT, based on the GSMA’s eSIM specification for secure communications. The agreement sees Infineon’s secured hardware controllers and Arkessa’s secured mobile data services provided by Arrow to OEMs, system integrators and enterprises for secure cellular services. Infineon’s SLM security controllers are based on eSIM and can be coupled ...
MEMS oscillators from SiTime enhance AEL Crystals’ IoT offering
MEMS oscillators from SiTime have been added to the range of IoT-targeted frequency control products available from AEL Crystals. The company explains that the IoT brings fresh challenges for frequency control manufacture as it requires products to accommodate multiple protocols, such as Bluetooth, ZigBee, Z-Wave, 6LoWPAN, CSR Mesh / Bluetooth Low Energy, Sigfox and Thread. Designs are also expected to require lower power consumption ...
Bluetooth LE module expands Mouser RF offering
Based on Toshiba’s TC35680 chip controller, the PAN1762 is the latest RF module from Panasonic that is now available from Mouser. The low power Bluetooth Low Energy (LE) 5.0 module is designed for used in the IoT, beacon and mesh networks to transmit large amounts of data wirelessly. The single-chip controller has an Arm Cortex-M0 core with a serial wire debug (SWD) interface and ...
Voila! Digi-Key adds wireless connectivity
Developers and makers can take an existing microcontroller application that does not have wireless connectivity and, using just two GPIO pins, add it without modifying the original firmware, via IoTize‘s TapNLink products for Bluetooth and near field communications (NFC) products. The French start up company has signed a distribution agreement with Digi-Key to resell the wireless connectivity products for microcontroller-based embedded systems as ...
TÜV SÜD supports industry 4.0 with UK IoT cellular test service
Technical service provider, TÜV SÜD, has launched its IoT cellular testing service. The service will be accommodated within the existing facility, claimed to be the only laboratory in the UK to offer a dedicated Narrowband-IoT (NB-IoT) test and certification service. Explaining the rationale for the service, TÜV SÜD explained that NB-IoT enables multiple machines, devices and services to be connected ...
Chip combines secure hash algorithm and PUF to protect IoT, industrial and medical
Maxim’s DS2477 secure co-processor is intended to protect industrial, medical and IoT applications with authentication and physical security. “It is a secure I2C co-processor with built-in 1-Wire master that combines FIPS202-compliant secure hash algorithm [SHA-3] challenge and response authentication with Maxim’s ChipDNA feature to provide protection against security attacks,” said Mouser, which is stocking the part. ChipDNA is Maxin’s brand for ...