Home » News » Products » Connectors (page 30)

Connectors

The latest Electronics Weekly product news on connectors, electro-mechanical devices for joining electrical circuits.

Industrial connector aimed at motors up to 830V and 40A

Amphenol Twinhousing

Twinhousing is an industrial connector shell for Amphenol’s Heavymate F series. Designed to accommodate two of the series modules, the metal housing is combined with an additional shielding frame for electromagnetic shielding. The plastic lever is designed for easy handling. Typical applications, particularly with the three-pole power module, are motor connections. Heavymate F connectors have crimp terminations and contacts rated ...

Low-profile locking connector for LED lighting

AVX 70-9159 locking contacts

AVX has added a locking plug to its 70-9159 series of low-profile 5A board to board connectors. Part of its ‘Stript’ insulator-less single contact range, the gold-plated beryllium-copper (BeCu) spring contacts have a positive latching mechanism and can absorb a 1mm of tolerance in the x and y direction. Led lighting is one intended application – the locking plug features the same ...

Corrosion-resistant waterproof RF connectors

Intelliconnect corrosion resistant RF connectors

UK connector maker Intelliconnect has introduced a range of nickel aluminium bronze alloy water-proof connectors for harsh environments. They are versions of the existing Pisces range, and aimed as marine, naval, chemical, oil and gas industry use. “Conventional RF connectors are manufactured from brass and finished with nickel plating or passivated stainless steel. Such finishes are subject to minor degrading in ...

Harwin opens £3m factory extension in Portsmouth

Harwin-BWW-8419-508-300x200.jpg

Connector maker Harwin has opened its new £3m manufacturing centre in Portsmouth, increase floor space on the site by 33%. The 3,000m² building was opened by HRH Prince Michael of Kent. “We are committed to high quality manufacturing in the UK  and we had outgrown our existing facilities, so to meet our growth plans, we had to expand,” said Harwin chairman ...

Ekinops transponder/muxponder line doubles network capacity

image-300x200.png

Ekinops is introducing a flexible rate transponder/muxponder line which allows network operators to double their transport capacity. Using an advanced digital signal processor (DSP) combined with Ekinops’ enhanced T-Chip (transport-on-a-chip) technology to support both DP-QPSK and 16QAM modulation formats on a single line card, Ekinops is able to deliver a low-cost, programmable 400G solution. This can double the capacity of ...

MACOM sampling laser driver for 400G connectivity

iStock_000012214892small-300x200.jpg

MACOM is sampling a quad channel linear externally modulated laser (EML) driver for 28 Gbaud PAM-4 solutions for 200G and 400G. The MACOM-003419 is a low power electroabsorptive modulated laser (EML) driver with high gain, high bandwidth, and output voltage capability up to 2 Vpp while it consumes less than 500mW of power. The device has differential inputs to provide ...

AVX 2mm battery connector resists consumer damage

AVX 9155-800 battery connector

AVX has released a series of low-profile battery connectors for devices with pluggable modules that vertically mate with a base unit, designed to prevent end-users damaging the contacts. With a 2mm pitch, the 9155-800 Series is intended for >5,000 mating cycles in consumer, medical, industrial, and harsh environment applications. Contacts are gold-plated beryllium copper (BeCu), and the contact geometry has been designed ...

Backplane connector carries 56Gbit/s in basestations

GetFileAttachment-300x200.jpg

TE Connectivity says that its Strada Whisper direct plug orthogonal (DPO) connectors are designed to eliminate mid-plane connectivity to improve airflow in basestations and other types of communications equipment. The backplane connector supports 25Gbit/s data rates and is scalability up to 56Gbit/s (PAM4 and NRZ). The DPO connectors are designed to offer alignment and installation that maintains electrical performance even ...

Molex has press-fit connector for 28Gbit/s

10feb16molex-300x200.jpg

Molex has introduced the NeoPress which is a press-fit/compliant-pin high-speed mezzanine connector system. It is a modular system consisting of tunable differential pairs and compliant-pin terminations with a staggered interface configuration which supports data rates up to 28Gbit/s. The compliant-pin termination is designed to minimise near-end and far-end crosstalk by matching the signal integrity of the surface mount connectors. Molex ...

Mouser, Fairchild, Littelfuse and Amphenol team up for USB Type-C

image4.png

Mouser, Fairchild, Littelfuse, and Amphenol are co-operating to deliver the building blocks of  USB Type-C products. With suggested data rates up to 10Gbps and up to 100W of power and a reversible interface for mating, USB Type-C technology delivers a multifunctional, single cable for audio/video, data, and power. Fairchild’s USB Type-C portfolio includes discretes ranging from controllers to power switches and USB 3.1 SuperSpeed switches. As ...